Installation Of Wires And Ground Wire

- Installation, alignment, and the full consolidation of all ground support; - reconstruction of the intersection under the project, in consultation with their owners - the clearing of the alignment of VL from the forest, bushes, boulders and other objects preventing the production of works; profiling tracks - picking fixtures and insulators with rejection according to the specifications - conveying by pickets drums with wire and ground wire, fittings and insulators in According to the draft of the work. Raskatochnye devices for reels with wire ustanovlivayutsya at a distance of 15-20 m from the boundary pillars in the side-mounted section of the span. Drums are placed on devices so that when they rotate against the rolling direction, deposited on a drum plant, a wire went down with his top. To reduce the contact wires to the ground as they should be rolling in commercials to raise the intermediate support. Depending on how the subsequent relocation of (on top or sinking to the ground) raskatochnye clips attached directly to the boom or to the insulator strings.

Crimping the connecting terminals in the rolling running motor press in accordance with standard technology cards. If you find defects on the wires of their removal and installation of repair sleeves must be made before the rise in support. When uncoiling wire and ground wire must strictly observe the safety rules laid down in key regulatory documents. Particular attention should be paid to the following requirements related to the specifics of the mountain conditions: - the selection and examination of ways of movement of workers and mechanisms should be identified and marked with warning signs avalanche areas, places of possible rockfalls, landslides and avalanches - rolling should be exercise, usually in the direction from lower to upper elevations, with reverse rolling raskatochnye devices must be equipped with reliable braking devices - the last 10-12 turns of wire or cable should be rolled out from the drum by hand, pre-rolled section anchored - on steep slopes and small screes are prohibited to work in the rain and after a thorough evaluation of slopes without a master or foreman - work hauling a tractor on a slope with a cross slope of more than 7 is not allowed, rolling the tractor is permitted to the longitudinal slope of 16 , when used as a means of hauling a bulldozer allowed to work on inclines with a slope of 25 .